OceanLED Explore E3

The combination of optics, electronics, form factor, built-in driver, and plug-and-play creates the most sophisticated underwater light range in the market. With Midnight Blue, Ultra White, Dual Blue/White, and RGBW light choices, the Explore E3 delivers a strong 5,000* fixture lumens into a low profile, Xchangeable Flush Mount body. A wide-angled, concentrated beam illuminates a big body of water, filling it with light and because of its small size and installed driver, the vessel takes up less room inside, allowing it to be installed in confined spaces. The use of extremely bright, randomly selected flashing strobe lights has been shown to attract better bait and capture more fish. The clamping kit, as well as the rest of the design, makes installation a breeze. Customers enjoy complete peace of mind when selecting the finest potential option for their boat with the Explore XFM Rear Enclosure. Superior Security. Absolute tranquillity.


  • 90° Top Beam
  • Up to 5,000 Fixture Lumens*
  • Side Beam 20°
  • Rectangular Beam
  • Optics of the next generation.
  • Built-in driver and a small footprint
  • Light output is the same as the Sport Series.
  • Less Installation time

Range of Colors

  • Midnight Blue
  • Midnight Blue / Ultra White
  • Multi-Colour
  • Ultra White



Fixture Lumens (Single Colour)5,000*
Fixture Lumens (Dual Colour)3,500*
Fixture Lumens (Colour Scroll)3,000*
IP RatingIP69k Certified
Min-Max Operating voltage DC9-32V DC
Current / Amp draw Single Colour (12V DC / 24V DC)5.5A / 2.4A
Current / Amp draw Dual Colour (12V DC / 24V DC)3.6A / 1.7A
Current / Amp draw Colour Scroll (12V DC / 24V DC)5.5A / 2.4A
Min-Max Operating voltage AC (Optional)100V – 240V AC
Current / Amp draw Single Colour (110V AC / 230V AC)620mA / 290mA
Current / Amp draw Dual Colour (110V AC / 230V AC)430mA / 210mA
Current / Amp draw Colour Scroll (110V AC / 230V AC)620mA / 290mA
Driver typeInternal
*Fixture Lumens rating is a measurement of total white light output from a complete (as sold) light fixture using laboratory standard, calibrated photometric measuring equipment.


Total weight1.2kg (2.65lbs)
Total Diameter (Including Flange)105mm (4.13”)
Diameter Of Body80mm (3.15”)
Profile Of Fixture4mm (0.16”)
Length97mm (3..8”)
Minimum Space Required Inside The Hull170mm (6.55”)
Hole Cut-Out83mm (3.25”)
Material (Mounting Tube)AB2 Aluminium Bronze
Material (Light Body)Aluminium

Mounting Recommendations

Boat size0-10m
Transom / Hull spacing0.5-1.2m (2-4’)
Installation depth below waterline25-30cm (10-12”)


4 Way V DC Power Junction Box019901
Explore AC Power Kit019904
Delrin Sleeve001-500638
Mounting Tube Extension Kit019905

Leave a Reply

Your email address will not be published. Required fields are marked *